Both images here are with the transmission in "D" at idle, engine at operating temp.
As an addition...
Wow. What a novel idea. Thanks so much.. Gonna try it today. Thanks again
BruceFritts 05-20-2025, 07:41If the brass cup is all that's left in there, rotating it won't hurt anything. It doesn't contact or surround the reluctor wheel, it's merely positioned
DmaxMaverick 05-19-2025, 19:40All that is left in the port is the brass housing.i tried to pry it out with a pick and a small screwdriver but it didn't budge. I was going to try an
BruceFritts 05-19-2025, 13:03
Duramax Head Gasket Replacement
Mine has always done that. Before and after injector replacements (mine's had 2, as well as a separate return line replacement after filling the crankcase
DmaxMaverick Yesterday, 13:37