Enthusiast
I am looking for a cleat/Mooring bit/bollard type of tie down. Something that goes into the stake pockets and has something similar to a "T" sticking up. Has anyone seen something like this?
Here is a link, I hope this works
http://www.marinetraderhardware.com/...are/pic1-1.jpg
Anything close would be appreciated. I like to be able to tie right to something like that. I do not like the rings...
SledZep<br />02 Chevy 2500HD LT CC 4x4 SB D/A Onyx/Graphite 285/75\'s<br />2 Matching car seats in the back
Enthusiast
83 K20 6.2 NA<br />84 C30 6.2 NA<br />85 K5 350,soon to be 6.2 turbo<br />99 Victory V92C<br />75 Vette L82<p><br />Member 1049
Enthusiast
Jed, thanks I searched and never saw those. Unfortunately I will not screw into the rail of my truck. I should have been more descriptive. I would like cleat/mooring bit type of tie down that get's anchored in the stake pocket and is stationary.
I think I saw them once....
SledZep<br />02 Chevy 2500HD LT CC 4x4 SB D/A Onyx/Graphite 285/75\'s<br />2 Matching car seats in the back
Enthusiast
Sled,
If you can't find one you want, you could easily manufacture a stake pocket base to mount the cleats to...
83 K20 6.2 NA<br />84 C30 6.2 NA<br />85 K5 350,soon to be 6.2 turbo<br />99 Victory V92C<br />75 Vette L82<p><br />Member 1049
Enthusiast
Sled, I just saw these. They don't go in the stake pocket, but they are under-rail mounted clamps. http://www.truckstuffusa.com/pilwtd823.html
83 K20 6.2 NA<br />84 C30 6.2 NA<br />85 K5 350,soon to be 6.2 turbo<br />99 Victory V92C<br />75 Vette L82<p><br />Member 1049
And the answer is...
Posting Permissions
