Results 1 to 2 of 2

Thread: Wanted.. Crossover for 6.2L Banks kit

  1. #1
    Join Date
    Dec 2003
    Location
    Yukon Canada
    Posts
    1,627

    Post

    Wanted
    One crossover for a Banks 6.2L turbo kit,for a 4X4.Interested in a used or new piece.
    Thanks
    90 Chev 3500 c/c 4x4,6.2na,400 auto,4:10 gears.DSG Timing gears,main girdle, isspro tach, pyro,boost,oil and trany temp.Dual Tstats, High volume peninsular pump,on shelf, Custom turbo and intercooler 85%complete. Change of plans for the dually, it's going to get a Cummins. Both trucks are Blue 90 4x4 crews

  2. #2
    Join Date
    Oct 2001
    Location
    Granby, Missouri, USA
    Posts
    3,087

    Post

    I ended up buying mine directly from Banks...I couldn't find a used one at the time. It's actually two pieces, so you'll need two part numbers.

    The Banks pipe is actually quite small in diameter...if you have good fabrication skills, I'd recommend you make one yourself. The worst part is the way Banks snakes the pipe around under the front of the engine.....it would take some work.

    Good luck!

    Casey
    1995 K1500 Tahoe 2 door, 6.5LTD, 4L80E, NP241, 3.42's, 285/75R16 BFG K02's; 1997 506 block; Kennedy OPS harness, gauges, Quick Heat plugs, and TD-Max chip; Dtech FSD on FSD Cooler; vacuum pump deleted, HX35 turbo, Turbo Master, 3.5" Kennedy exhaust, F code intake; dual t/stats, HO water pump, Champion radiator; Racor fuel filter

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •