There was a FSD resister value chart in one of the old threads. How do I do a search on the old forum threads?
There was a FSD resister value chart in one of the old threads. How do I do a search on the old forum threads?
1996 K3500 EX-CAB 108K MILES
MODS:UnderDASH PMD,38G Aux Tank
ISSOPRO BOOST&EGT,Fuel Pres Gage
CSI Oil & Trns Temp Gages
BD DOWNPIPE, Rem Oil Filter
Dual inline LP/Filter SOLD AT 130K MILES, Know GM LESS
Alll available threads from the "old forum" have been converted and posted here. To search, choose the "Search" feature on the toolbar at the top of this page.
The Constitution needs to be re-read, not re-written!
If you can't handle Dr. Seuss, how will you handle real life?
Current oil burners: MB GLK250 BlueTEC, John Deere X758
New ride: MB GLS450 - most stately
Gone but not forgotten: '87 F350 7.3, '93 C2500 6.5, '95 K2500 6.5, '06 K2500HD 6.6, '90 MB 350SDL, Kubota 7510
thanks, i'll try again
1996 K3500 EX-CAB 108K MILES
MODS:UnderDASH PMD,38G Aux Tank
ISSOPRO BOOST&EGT,Fuel Pres Gage
CSI Oil & Trns Temp Gages
BD DOWNPIPE, Rem Oil Filter
Dual inline LP/Filter SOLD AT 130K MILES, Know GM LESS
I don't know of a forum thread that had the chart, but we produced an article in 2003 that included it. As it turns out, that article is still available concerning the FSD Calibration Resistor.
Jim
Contact Me
Lil Red - Duramax 6600 Conversion
Content Web Site
The Diesel Page - 6.2L/6.5L Diesel Books
The 6.2L/6.5L Troubleshooting & Repair Guide
Duramax Diesel Conversion Guide
Duramax Diesel Service Guide - How to Replace Head Gaskets, Injectors, Water pump, and more - New!
Photo Album
TDP Youtube Channel - New!
THAT"S IT
THANKS MUCH,
Now I can build my external resister pack so I
can test the FSD's I was given,
so far 2 good one's ,
1996 K3500 EX-CAB 108K MILES
MODS:UnderDASH PMD,38G Aux Tank
ISSOPRO BOOST&EGT,Fuel Pres Gage
CSI Oil & Trns Temp Gages
BD DOWNPIPE, Rem Oil Filter
Dual inline LP/Filter SOLD AT 130K MILES, Know GM LESS