Results 1 to 2 of 2

Thread: SOL D revisited and some observations

  1. #1
    Join Date
    Apr 2001
    Location
    Newberg Oregon
    Posts
    12,302

    Default SOL D revisited and some observations

    Hello again from the Planet SOL D
    Well the Burb has been running wonderful since the rebuild. I put the Sol D right back up top when I reinstalled the engine.
    The initial fire up was great and it is just sweet.
    About a month ago the new (rebuilt) starter took a poop and started slowing down noticeably and even though the engine was turning over fair and the temp outside was still very moderate the thing would not start at all.
    I jumped it off the big trucks 4 big batteries and it lit right off.
    I replaced the starter with a warranty one and then rewired the starter solenoid to pull off of a relay instead of asking the ignition switch to do all the work and subsequently pulling power off the main harness.
    The rig starts wonderful and we have had some mornings now that have been in the mid 20's F and all went well on an overnight cold start. I wait about 3 seconds after the glow light goes out and the things jumps to life with hardly a full turn on the engine by the starter.
    The issue with the SOL D is definately voltage related. The rewiring of the starter solenoid really helped the issue.
    Just a note for anyone still wondering about the SOL D
    The unit has been on the truck now for 5000 miles and 2 years I think and other than the one cold issue last winter its been fine.
    (1) 1995 Suburban 2500 4x4
    (1) 1997 Astro
    (1) 2005 Suburban (Papa Smurf)
    THIS IS BOW TIE COUNTRY

  2. #2
    Join Date
    Sep 2000
    Location
    usa
    Posts
    2,646

    Default

    Similar results with the FSD - low batt volts gives longer crank times, possible DTC36 - long closure time - starts happening every Fall\Winter.
    jd
    '96 Dodge 3500HD cc 2wd drw............'89 GMC 3500 cc 4wd drw
    5.9 12v #10TST 6sp SBC13-1.375.......6.5TD EFI maxEtorq v2.0 DSG
    DODGE makes it CUMMINS shakes it.....4L80E 205 4.10 Dana60\70HD
    6 in a row makes it go.......................Grandpa's big truck

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •