Learning how 2 use CarCode OBD2?
I've had my car code for awhile now and have issues using device controls like TDCO takes awhile to get setting I want.
I'm running a gear set instead of timing chain and find that the gear manufacture (DSG) states timing on 1996 and newer 6.5's should be between -1.70 & -1.90 while 1994 & 1995 6.5's only -1.95 is recommended.
Anyway, with all the features the Car Code now has for resetting I wonder where to learn how to use it correctly?
99 GMC SUB, 2500, 4x4, 6.5 TD (F) #H32 enhanced blk, Phaser timing set, B&D IC, 3" ATS exh, K&N w/prefilter, 4WD NVG 246, 4L80E kevlar Transgo off road/tow mods/B&M supercooler, 14 FF MagTec w/locker 3.42:1, 9.25" IFS frt/diff 3.42:1 w/ARB locker, AutoMeter Boost & pre-turbo pyro meter, 12,000 lb hydro winch, Warn classic bumper w/brushguard & diesel scoop, Max E-torq Stage 3, hi pop inj, oil bypass sys, on board air comp for front ARB locker & tire inflation, DynaView driving/auto-cornering lts, DZ nerfs, A/T 285/75/16 SilentArmor 3750 lb rated on 3750 lb rated Alcoa, 3 IP drivers 2 r spares.