Page 1 of 2 12 LastLast
Results 1 to 20 of 21

Thread: Need Performance Advice

  1. #1
    Join Date
    Apr 2001
    Location
    San Marcos, TX
    Posts
    128

    Default Need Performance Advice

    I have a 2003 LB7 and pull 11,000 lb. trailer with a heavy tounge weight. The truck has 45,000 miles on it. I replaced the stock tires with 265's for an extra weight margin. Since doing so I have noticed a slight performance drop. Of course the speedo is off and the DIC is now out of whack.

    I am not big on major performance upgrades and I am retired so $$$ are limited.

    I've started considering a tuner and have looked at the Preditor, Edge Attitude, and the new Banks Bullit. I would only use it when towing which is 90% of vehicle use. I am looking to replace what I "feel" was lost in performance when putting on new tires and the best ecomomy possible. I also would like to restore speedo and DIC accuracy if possible. (i do have gps to check speed). It would need to be easily removable/untraceable for warranty reasons and I would like an included EGT guage.

    I don't want a warranty hassle. I don't fully understand how these things work and the + and - of each product.

    This truck is the best rig I have in 35 years and I don't want to cause problems and unreasonable expense.

    Thanks, Larry
    Former 2003 Chev. D/A CC, Snug Top shell, Prodigy, 2003 Arctic Fox 30U, Alternator mt. fuel filter.....basically stock truck.

    2012 Ram Megacab 3500, Snug Top, same trailer, stock truck

    GO DUCKS

    GOD BLESS THOSE WHO PROTECT AND SERVE!

  2. #2
    Join Date
    Mar 2000
    Location
    Loyal WI US
    Posts
    10,792

    Default

    Mark Rinker does a lot of towing and has reported performance AND mpg gains with his KD Custom tuning.
    Kennedy Diesel-owner
    More than just a salesman-I use and test the products that I sell on a daily basis!
    Superflow Lie Detector in house
    2002 Chev K2500HD D/A CC Long LT 11.77@ 124mph at 7700# fuel only-e.t. needs help
    2005 Chev K3500SRW D/A CC Long LT(SOLD)
    2007 Chev K2500 Classic EC Short LT (Sold)
    2012 GMC K3500SRW D/A CC Long LTZ Happy Birthday to me! Built 1 working day after my birthday and delivered 7 days later.
    2016 GMC K3500SRW D/A CC short LTZ

    Custom tuning in house using EFI Live tuning software!

  3. #3
    Join Date
    Oct 2003
    Location
    NW NJ
    Posts
    59

    Thumbs up

    Look into the predator progammer. It will do a power boost program and you can fix the speedo problem.
    I have my "New to me" 2001 dmax, I just drove 1700+ miles from denver to NJ. I kept the truck stock for the first tank of fuel. MPG was 15.4 and average speed was 75mph on flat land.
    I bought the programer and brought it with me and after the first fill up I used it to reprogram for the 40hp gain.
    OMG... I could not believe the difference!
    More power, faster acceleration, more feel in the seat with lighter foot pressure. And my MPG went up to 17.6 still driving 75-80mph flat thru kansas.
    My truck has 155000 miles on it and the injectors were replaced at 145000.
    I found this programer on e-bay for around 300 bucks.
    Oh, and this will monitor the engine, look at and reset engine codes.

    Jeff...
    1992 GMC Sierra("2003 TDP Photo Contest Winner") 6.5L Turbo Diesel, 4L80E Auto, 4x4, 3" Body Lift, 33"x12.5"x16.5" Tires, Back Country Nerf Bars, Banks Stinger Kit, Banks Pillar Pod, Banks Boost, Pyro, Trans Gauges, Kennedy Quick Heats, Lube Specialist Oil Lines cooler kit,

    2001 GMC Sierra EC K2500 6.6L 4x4 Duramax-Allison Long Bed, Predator 40hp program.

  4. #4
    Join Date
    Jun 2000
    Location
    Morrisville, VT, USA
    Posts
    2,401

    Default

    The Hypertech tuner dosn't have the greatest reputation here in the DP, but, that's what came with my truck, so, that's what I've used now for a year, with good results. I've kept it on level 3 most of the time. The power increase is near unbelievable. My towing mileage has averaged just over 12mpg. That's towing an 11,000 lb trailer, plus about 1,600 load in the truck. I get from 17 to 19.6, solo.
    I've rolled my tires on a good smooth surface, measured the circumference and progamed it into the computer. My odom. checks out dead accurate on measured miles.
    The H -Tech can be put back to stock tuning in about 4 minutes.
    The H-tech is one of the cheapest on the market, I think.
    Now, I just ordered an Edge Juice W/Attitude, which I'm going to piggy-back to the Hypertech. Easy to do, I understand. I'll leave the H T on either stock or level one. My son has an 03 DM - 3500 Dually with Edge Juice-W/ AT. Loves it for the new power and the monitor read-outs.
    If I felt that I only needed an EGT readout, I'd be very contented with a Hypertech programer, and a gauge on the post, or dash. You'd love the extra power. Pretty hard to beat the ego boost this old hillbilly gets when some young blighter comes off an on-ramp with a BMW at 40 mph and can't get by you, (can't even catch up to you), until you let off at 80-90! That's solo, not with that 11 K trailer, off course.
    Good luck with whatever you get.
    DW
    2008 Jaco Seneca 35' motor home (Kodiak 5500 chassis). Pulling 18' Wells Cargo enclosed trailer, with 2016 Miata in it.

  5. #5
    Join Date
    Apr 2001
    Location
    San Marcos, TX
    Posts
    128

    Default Decisions, Decisions

    I am leaning towards the Predator or Edge with Attitude. The positives of the Predator are the tire size recalibration and east of installing and uninstalling (in case warranty work is needed) The negatives are it does not monitor engine EGT and boost and doesn't adjust the DIC. The price is affordable. It is strong on trouble codes and such.

    The Edge doesn't apparently allow for speedo adjustment but has a neat display that monitors EGT and such. It is more expensive. Its negative is that it looks like it is more difficult to remove and put out of sight when the rig goes in for service. It is the medium price option because guages won't be needed.

    A custom tune looks like a great way to go especially with a seperate ECM but $900. + guages is out of my league.

    I guess I'll need to break down a put guages on....

    I guess they call it the begats.....do one thing it always causes something else to happen.

    I'll look into the hypertech.

    Thanks for the suggestions and looking forward to more.
    Former 2003 Chev. D/A CC, Snug Top shell, Prodigy, 2003 Arctic Fox 30U, Alternator mt. fuel filter.....basically stock truck.

    2012 Ram Megacab 3500, Snug Top, same trailer, stock truck

    GO DUCKS

    GOD BLESS THOSE WHO PROTECT AND SERVE!

  6. #6

    Default

    Kennedy's tune is very smooth in comparison the the Predator. I have run both and found his tow tune to improve mileage and make the DMax quieter than stock when towing. Not cheap - but worth the extra $$$ in my opinion.

    While gauges are a good idea - I think you could get a custom tune to take care of your towing needs, tire size change, and use it safely without gauges. I am not running any on the 2002.

    One interesting observation: The oil in the 2002 (with 190k miles on the odometer) only turns medium brown and remains transluscent - not black and opaque between 10K mile oil changes now. The difference dipstick to dipstick between the 2001 and the 2002 is dramatic. I attribute it to complete combustion and no soot with JK's tune.
    Last edited by Mark Rinker; 03-09-2007 at 18:09.
    2011 Chevrolet Tahoe 5.3L daily driver
    • Previous owner of two 1994 6.5L K3500s, '01, '02, and '05 6.6L K2500s, '04 C4500, '06 K3500 dually, '06 K3500 SRW, '09 K3500HD SRW, '05 Denali
    • Total GM diesel miles to date : ~950K

  7. #7
    Join Date
    Dec 2004
    Location
    Texas
    Posts
    683

    Thumbs up

    Quote from: One interesting observation: The oil in the 2002 (with 190k miles on the odometer) only turns medium brown and remains transluscent - not black and opaque between 10K mile oil changes now. The difference dipstick to dipstick between the 2001 and the 2002 is dramatic. I attribute it to complete combustion and no soot with JK's tune

    Mark, that is a major accomplishment and really important to folks who want to pollute less. If there is less soot in the oil there has to be less wear. That's BIG. No, in fact, I guess my regard for John Kennedy just went up another level.
    For guys that haul cross country like you do the cost is nothing compared to what it will save you if that is really what is happening. Makes sense to me.
    02 2500HD LT D/A SB CC 4X4 BLACK, Westin stainless nerf bars, BW GN Hitch,Racor 60S post oem fuel filter, Oil Guard bypass engine oil Filter. All synthetic fluids. Kennedy boost valve, edge, Modified air intake,EGT & Boost digital gauge,TransferFlow combo fuel & tool box, Air Lift Suspesion Bags Rear & compressor with remote, Bilsteins front & rear, Frontier front replacement bumper.

  8. #8
    Join Date
    Jun 2005
    Location
    Iowa
    Posts
    50

    Default

    Question for Mark Rinker, and Dick Wells. What upgrades have you guys done to your intake and exhaust? I'm starting to upgrade my LLY, and am thinking about exhaust. Thanks.
    08 2500HD LMM D/A Ext cab sb LT1 4x4 Greystone Metallic. 265 75r 16 Mastercraft Courser C/T 10 ply's. B&W GN. Pull 20' STL Featherlite Combo trlr.

  9. #9
    Join Date
    Jun 2000
    Location
    Morrisville, VT, USA
    Posts
    2,401

    Default

    Mark will probably step in here with the right poop, but here's my humble input, FWIW.
    My truck is an LB7, made in Nov. 03. So, up-grades to an LLY may result in a higher output, overall, since the LLY seems to have quite a bit more grunt, out of the box.
    I just installed an S&B air system, 3 days ago. Can't tell yet, what kind of gains, if any, from that. I did it because I needed a new air filter anyway, and wanted to free up the intake for any other add-ons, down the road.
    I went back to stock with the Hypertech, before I installed an Edge Juice W/Attitude, 2 days ago. Kept the Hypertech to retain the accurate tire size/speedometer settings. Wanted the Attitude monitor to get EGT and boost redouts without spending the extra for gauges, in addition to 5 levels of power, on-the-fly. So far, I love it. A really noticeable difference, especially on launch, on level 2 compared with the HT on level 2! Much more solid feeling, at my usual throttle opening, felt under my right foot.
    Next step will be 4" exhaust, side exit, front of the tire. I put in air suspension over Christmas, at home, and can't use the rear exit. I turned a piece of the old tail pipe down in front of the axle, and that's where it is, still, with the stock muffler. Gotta change that. Don't like the sound, and the RR shock is getting black. If I could afford it, I think I'd go with a Corsa, but I can't and I won't. Need to research this. Have to order one that uses the stock hangers, but will exit the side.
    Hope this is of some interest. Any questions, just ask.
    DW
    2008 Jaco Seneca 35' motor home (Kodiak 5500 chassis). Pulling 18' Wells Cargo enclosed trailer, with 2016 Miata in it.

  10. #10
    Join Date
    Jun 2005
    Location
    Iowa
    Posts
    50

    Default

    I sort of fell into a deal I didnt want to pass up on a Bully Dog Power pup. A friend of mine sells them and had one for an LLY that was ordered by mistake for a LB7. So he said take and play with it, if you dont want it just bring it back. Well, I've only ran it on level 1, but now its mine. He sold it to me for 1/2 price. I'm not going to tow with it without either being able to read egt's or changing my ehaust. The LLY handles my 10,000 lb trailer easily anyway.
    08 2500HD LMM D/A Ext cab sb LT1 4x4 Greystone Metallic. 265 75r 16 Mastercraft Courser C/T 10 ply's. B&W GN. Pull 20' STL Featherlite Combo trlr.

  11. #11
    Join Date
    Jun 2000
    Location
    Morrisville, VT, USA
    Posts
    2,401

    Default

    Sounds like you got a good deal. Warantee issues, if they occur, could probably be delt with through the guy that sold the BD to you. The dealer that sold me the Edge, said that both BD and Edge are getting pretty sticky about dealing directly with customers/users, since they've both changed hands recently. I went with a new unit because of that. Got the Edge Juice W/Attitude for $640, including shipping. Not a super deal, but I can get help from the dealer if a problem occurs.
    Looks like you're headed in the right direction with your unit. Keep us posted.
    DW
    2008 Jaco Seneca 35' motor home (Kodiak 5500 chassis). Pulling 18' Wells Cargo enclosed trailer, with 2016 Miata in it.

  12. #12
    Join Date
    Jun 2005
    Location
    Iowa
    Posts
    50

    Default

    Sounds like you got a good deal to me. I'm gonna play with the BD and see what kind of mileage I can get, back and forth to work. I hit a fair share of stoplights and hand calculated get about 16.8 to 17.4, depending on my right foot. I'll keep you posted.
    08 2500HD LMM D/A Ext cab sb LT1 4x4 Greystone Metallic. 265 75r 16 Mastercraft Courser C/T 10 ply's. B&W GN. Pull 20' STL Featherlite Combo trlr.

  13. #13
    Join Date
    Jan 2005
    Location
    St. Louis, Missouri (pronounced misery)
    Posts
    203

    Default My .02

    I JUST ordered the Kennedy Custom Tune and 4" Turbo back exhaust. I HAVE NOT installed the tune yet. However I changed the exhaust about 1200 miles ago. All I can say is WOW!

    The truck sounds better, but right off the bat I noticed the change in mileage.
    I have honestly seen my MPG go from around 14 mpg around town to 15. I also know that when I hammer and go to WOT (for passing only I HAVE PRACTICALLY NO SMOKE!!

    I am back from my business trip and that custom tune will be in VERY soon! I can't wait! One last thing, Kennedy's exhaust uses the factory hangers. I'd bet that you could work something out with him for customizing that exhaust.

    He's very easy to talk to and he knows his stuff!

    Scott
    Scott
    St. Louis, MO


    '06 Silverado K2500 4x4 Crew Cab D/A "Big Max" AmpResearch retractable Running Boards, 4" Turbo back Kennedy Exhaust, Kennedy Custom Tune!
    '99 BMW K1200LT "Special K" my other "SUV"
    '07 Salem by Forest River Fifth Wheel Toy Hauler

  14. #14
    Join Date
    Jun 2005
    Location
    Iowa
    Posts
    50

    Default

    If I go any further, exhaust is definately the next step. From what I read here you should be very happy with your Kennedy tune. Keep us posted.
    08 2500HD LMM D/A Ext cab sb LT1 4x4 Greystone Metallic. 265 75r 16 Mastercraft Courser C/T 10 ply's. B&W GN. Pull 20' STL Featherlite Combo trlr.

  15. #15
    Join Date
    Mar 2006
    Location
    Phoenix, AZ
    Posts
    144

    Default

    Quote Originally Posted by SoTxPollock
    Quote from: One interesting observation: The oil in the 2002 (with 190k miles on the odometer) only turns medium brown and remains transluscent - not black and opaque between 10K mile oil changes now. The difference dipstick to dipstick between the 2001 and the 2002 is dramatic. I attribute it to complete combustion and no soot with JK's tune

    Mark, that is a major accomplishment and really important to folks who want to pollute less. If there is less soot in the oil there has to be less wear. That's BIG.

    For guys that haul cross country like you do the cost is nothing compared to what it will save you if that is really what is happening. Makes sense to me.
    The truck doesn't pollute less. It pollutes more. In point of fact, donning a tune that defeats the EGR (that is what is required to observe less black in the oil) is highly illegal, with fines that begin at $10,000 (IIRC) for the business owner who does it. I think that is per incident. Google "clean air act" and "fines" if wanting to research it. The fines do apply to individuals also, and ignorance does not qualify as a defense.

    In any event, an egr blocker, for $5, or simply unplugging it, is a far cheaper method.

    "Smokeless" tunes, using air correlated fuel limiting, is a good idea. EFILive offers this capability. Equipped with a custom PID, the "mixture" is easy to monitor, and anyone can make a smokeless tune that has the beef and driveability of a tame performance tune. Extra locked ECM is not required. I don't believe this will keep oil cleaner however, like the egr defeat. Soot recirculated into the cylinder, via egr, is the sure way to keep oil cleaner.
    Michael 04.5 SRW LLY

    custom stock intake, upsized boost tubes, Pre-turbo WMI, EFILive custom tune, Aerotech Scan Gauges.

    Go Smokeless!

  16. #16

    Default

    (Sorry, I missed the updates on this thread for a couple of weeks.)

    My 2002 LB7 with JK's tuning is running stock intake and exhaust.

    My only comment on upgrading LLY trucks that will be towing, would be to watch your intake air charge temps carefully. As most of you know, there were plenty of LLYs with overheating issues in stock trim, some under only moderate towing loads. My '05 LLY was left bone stock for the 80K I used it, and only exhibited mild overheating in summer months, compared to the LB7s hauling the same loads.

    Here is an article written by a DP member, and LLY owner. What I take away from this is you better trust who writes your LLY code if you upgrade it. Depending on their knowledge of the LLYs factory limitations, they could solve the issue, or make the issue much, much worse.

    http://members.cox.net/beekiller/GMC...PLICATIONS.doc

    Personally, my vote would be with JK's LLY tune, as he does extensive realworld testing on and off the dyno. Personally, I wouldn't mod any LLY and tow with it, without gauges - and specifically an intake air charge temp gauge, after reading this article.
    2011 Chevrolet Tahoe 5.3L daily driver
    • Previous owner of two 1994 6.5L K3500s, '01, '02, and '05 6.6L K2500s, '04 C4500, '06 K3500 dually, '06 K3500 SRW, '09 K3500HD SRW, '05 Denali
    • Total GM diesel miles to date : ~950K

  17. #17
    Join Date
    Mar 2006
    Location
    Phoenix, AZ
    Posts
    144

    Default

    Not coincidentally, the 3rd Gen vehicles now have intake temp monitoring. I think it is referred to as an "AAT" input, ambient air temp, which IMO is a complete misnomer as it is monitored post-CAC. Important ignition parameters are now adjusted based on air condition immediately pre-intake. That may have been a pre-required change for GM to adopt the bosch PCM package.
    Michael 04.5 SRW LLY

    custom stock intake, upsized boost tubes, Pre-turbo WMI, EFILive custom tune, Aerotech Scan Gauges.

    Go Smokeless!

  18. #18
    Join Date
    Feb 2000
    Location
    Montana
    Posts
    11,398

    Arrow

    KB, excellent work on the linked piece!

    Real-world test data can be of some use to support the theoretical. For example, we know raising boost pressure increases IAT, but does the boost increase help or hurt power or ECT when towing a 10K trailer up a long steep grade. That's really the bottom line. Bring your truck to MT this July, and we'll test all you want.

    Jim

  19. #19
    Join Date
    Mar 2000
    Location
    Loyal WI US
    Posts
    10,792

    Default

    Quote Originally Posted by killerbee
    Not coincidentally, the 3rd Gen vehicles now have intake temp monitoring. I think it is referred to as an "AAT" input, ambient air temp, which IMO is a complete misnomer as it is monitored post-CAC. Important ignition parameters are now adjusted based on air condition immediately pre-intake. That may have been a pre-required change for GM to adopt the bosch PCM package.

    Killerbee still has no clue. AAT is just that Ambient air temp or the air temp as it enters the air box. It can be dangerous to believe someone with so little knowledge of what is going on with the Duramax engine.

    Here's where Killerbee was so naive to think that he was getting 30.5 mpg:

    http://www.thedieselgarage.com/forum...ad.php?t=23769

    For JohnQ dieselowner to be fooled by the DIC, is understandable, but a guy writing papers and proclaiming to know what he's talking about should certainly have enough common sense to verify his test results. How do you trust any data from an "engineer" who cannot even make simple MPG calculations?

    Then there's the whole "degas" thing where a condition was described in which the reservior cap wouldn't vent inward and gradually the coolant level dropped (in abscence of any leaks) by some mystery of twisted science.

    This was followed by the use of the old 2001 and "gasser" airbox that GM did away with after their first year of production due to problems...
    Kennedy Diesel-owner
    More than just a salesman-I use and test the products that I sell on a daily basis!
    Superflow Lie Detector in house
    2002 Chev K2500HD D/A CC Long LT 11.77@ 124mph at 7700# fuel only-e.t. needs help
    2005 Chev K3500SRW D/A CC Long LT(SOLD)
    2007 Chev K2500 Classic EC Short LT (Sold)
    2012 GMC K3500SRW D/A CC Long LTZ Happy Birthday to me! Built 1 working day after my birthday and delivered 7 days later.
    2016 GMC K3500SRW D/A CC short LTZ

    Custom tuning in house using EFI Live tuning software!

  20. #20
    Join Date
    Mar 2006
    Location
    Phoenix, AZ
    Posts
    144

    Default

    Quote Originally Posted by More Power
    KB, excellent work on the linked piece!

    Real-world test data can be of some use to support the theoretical. For example, we know raising boost pressure increases IAT, but does the boost increase help or hurt power or ECT when towing a 10K trailer up a long steep grade. That's really the bottom line. Bring your truck to MT this July, and we'll test all you want.

    Jim

    Jim, would love to. But I'm going to use the good sense God gave me and move on.

    It was nice chatting. Good luck with the trucks Mark.
    Michael 04.5 SRW LLY

    custom stock intake, upsized boost tubes, Pre-turbo WMI, EFILive custom tune, Aerotech Scan Gauges.

    Go Smokeless!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •