Enthusiast
How to change injectors??
I have a set of new injectors for my 83' C30 and I'm hoping to install them myself and before friday 9/28. Can anyone tell my the correct procedure to install these? Do I need a special open end wrench to remove and install them? Is there anything else I should know? thanks
'84 GMC Suburban 6.2 2wd 700r4 (Greasecar Vegi-Oil Fuel Conversion)
'83 Chevy C-30 6.2 Short Bus (Gus the Bus)
'77 Mercedes 240D (Old Yeller)
Enthusiast
Bump
To the top
Also injector recomendations and suppliers.
i'm special
when i changed the injectors on my 6.2 all i needed was a 30 mm socket. but it had to be a deep socket. however that was when the engine was out of the truck and the exhaust and intake and injection lines were all removed.
2011 VW Jetta TDI, pretty well loaded without leather.
2006 GMC Sierra D-max, 4x4, 4 door, bumper, winch, Espar heater, and the HID lights are a nice touch too.....
1986 GMC 3500, 454 on propane, 4 speed, 4x4, crew cab dually......the welding truck
1984 Toyota 4x4 pickup, 4.3 V6, 700R4, Toyota t-case.......transforming into 4x4 cage buggy
Posting Permissions
Reply With Quote