has any one heard anything about the industrial injection turbos for the lb7's
has any one heard anything about the industrial injection turbos for the lb7's
Yeah, the Silver Bullet.
SWB Ex Cab K2500HD 04.5 Lt/Amsoil B2B/LT235-85R16/ARE Tonneau/BedRug/Evans NPG+/Putco White-Out/VR-Straps/HIR 9011&12/Mag-Hytec Diff/Cat delete pipe/Built Trans/Sun Coast 6SPD/Sun Coast Transfercase Brkt/Sun Coast Filter Lock/SD Rods/Racor Pre/OEM 3" Ext./MikeL Trans Cooler & Snake Oil(C3 Oiler)/Cognito Braces/TTS Tuning/Magnaflow 4"
dose anyone have one what kinda boost dose it put out what is the power range
dose it spool up fast
02 lb7 two stage k&n with afe filter, thermo tech, hot edge with attitude, 75 ddp injectors, ats protorque propane, bd manifold, mbrp, ats waterboy, 150 fass, tie rod end sleeves
It spools faster than stock. Once lit watch out the truck won't be going straight down the road. Runs upward of 50-55psi depending on the tune and fuel system. Supports around 600hp at the rear wheels.
do you have a 62 or 64
02 lb7 two stage k&n with afe filter, thermo tech, hot edge with attitude, 75 ddp injectors, ats protorque propane, bd manifold, mbrp, ats waterboy, 150 fass, tie rod end sleeves
I think both of them are the 64mm.