I am having a problem with the clutch in my truck not fully disengaging.
I can stand on the pedal lifting myself off the seat and the clutch is still creating some friction. When the truck is cold this does not happen. When it heats up the problem starts until it is impossible to shift the truck. There is enough friction to pull the truck up a hill in the granny gear with the clutch pressed to the floor. It seems like if there was just another 1/64th of an in. (guess) the clutch would function properly. Is there any adjustment or diagnosis (master or slave cyl.) to this problem. If there is an adjustment, where is it made?

Thank you for reading.

SS