Originally Posted by
SoTxPollock
Side note: By the way JBPLOCK, you said SWR said the wear was 6 to 7mm size, that's not millimeters obviously, you meant microns right?
SoTx,
Yes thanks for catching this 
.. microns not mm 
(post has been edited)
Also ..
Originally Posted by
Idle_Chatter
Kennedy Mega Filter installed post-OEM ....
... sometimes difficult to change after a long use interval (filter stuck to filter head).
Tom,
I also had a tough time breaking my first Mega Filter loose ... when installing the second one I removed the O-ring and coated it with some Parker Super O-lube (similar to silicone grease) .. When the time came to change, it came of with out any trouble ..
Last edited by jbplock; 10-04-2009 at 15:39.
Bill
03 2500HD D/A CC/SB/4WD,OilGuard, MegaFilter,LiftPump/PreFilter, Bilsteins,RetraxRollTop,J&J Boards,Coolant Filter,AlliDeepPan,FastIdle,AllHeadLightsOn,
98 K3500 6.5,SOLD
Reply With Quote
