While driving home the other night, I had it on setting 3, drive. While at highway speeds of 70 mph, the power level in the upper right corner went to 0, or stock. There was no noticeable power loss. Now, trying to re-create the problem I had the chip on setting 5 and drove it hard for a bit. Same thing happens at 60 mph. Again no noticeable power loss, but the monitor shows a 0 setting. After about 5 minutes of driving the setting returns back to 5 which is where it was originally set. Is this a common problem? Is this a display problem or is the chip actually acting up? If anybody has had similar problems I would appreciate the input.