Results 1 to 2 of 2

Thread: Cranks but won't start. PMD?

  1. #1
    Join Date
    Jun 2009
    Posts
    32

    Default Cranks but won't start. PMD?

    I think my PMD has gone bad. Yesterday I shut it off for about 3 minutes.
    Would not restart, cranked but didn't fire. Left the hood open for an hour,
    started immediately. Ran the rest of the day without a problem, started
    hot 6 times. This morning went to start truck, nothing. Cranked but no go, no smoke so no fuel. Pouring rain so left it, took another vehicle to work. Will change fuel filter and fuel pump, when I open the bleeder on the filter, pump only runs a few seconds.

    Comments? I was considering installing the new Stanadyne PMD anyhow...

    Duane

  2. #2
    Join Date
    Mar 2000
    Location
    Loyal WI US
    Posts
    10,792

    Default

    Generally speaking stalls and restarts progress to total no starts eventually. Sometimes the transition is quite rapid. I'd say PMD in all likelihood.
    Kennedy Diesel-owner
    More than just a salesman-I use and test the products that I sell on a daily basis!
    Superflow Lie Detector in house
    2002 Chev K2500HD D/A CC Long LT 11.77@ 124mph at 7700# fuel only-e.t. needs help
    2005 Chev K3500SRW D/A CC Long LT(SOLD)
    2007 Chev K2500 Classic EC Short LT (Sold)
    2012 GMC K3500SRW D/A CC Long LTZ Happy Birthday to me! Built 1 working day after my birthday and delivered 7 days later.
    2016 GMC K3500SRW D/A CC short LTZ

    Custom tuning in house using EFI Live tuning software!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •