Thanks cowboywildbill, that explains a lot. Since I have had many problems with the center set of lights, I had broken the little connector in there and had to solder it. That was last year. Things were working fine till a little while ago and one of the three lights was out. When I took it apart trying to be very careful with my solder job, I might have made contact with the 2 wires, making me think I blew a fuse. Now I have no power to any of the roof lights, and one other thing I've noticed is that when I turn on the headlights all the dash lights dim like they are supposed too, but the radio display does not. I have recently purchased a "Scangauge II", but it shows no codes. I probably blew some little circuit in the BCM and now will never get them to work. Sounds like I'm doing some body work in the near future, since NYS won't pass a vehicle inspection if an installed light does not work.