So I am new to the 6.5 Diesel and need some help. I have a 95 k2500 4x4 and got a DTC code 35. I figured it was PMD as its never been relocated. I ordered the kit to move it behind the bumper as well as a fuel lift pump. I went to go replace it tonight only to find the line is seeping diesel due to severe rust (Ohio salt). My question is can I use rubber fuel line to replace all the rusted metal line? It looks to be 3/8 and 5/16 or 1/4.
I tested the pump and it is bad or the OPS is bad, either way I am replacing both of them. My plan is to go to napa and buy the ends that will fit the fuel pump and then clamp rubber fuel line on and run it to the fuel filter and tank.
Anyone done this? Any tips? pros cons?
As always this newbie greatly appreciates any and all help. I did a search and maybe I didn't use the correct word combination but didn't find anything pertinent.