Results 1 to 2 of 2

Thread: Pyro Gauge Not Reading

  1. #1
    Join Date
    Mar 2000
    Location
    Geneva, IL
    Posts
    364

    Default Pyro Gauge Not Reading

    Hi,

    I have a Banks pyro and gauge that are about 13 years old, and have worked well on both my '01 and '09 up until a couple of weeks ago. Now I get no reading on the gauge at all. I've already visually inspected the wiring, but have not pulled the probe to inspect it.

    What troubleshooting steps can I take to decide whether it's the gauge or the probe that needs replaced? Any ideas about a cost-effective source for any replacements I may need?

    Thanks for any help you can provide.
    Rich Phillips
    Member #27
    2019 K-2500 Crew Cab Z71
    Cedar Creek Silverback 33RL Fifth Wheel
    In The Past: '82 6.2 Jimmy Blazer, '93 6.5 GMC K-2500, '01 DMAX K-2500, '09 DMAX K-2500

  2. #2
    Join Date
    Mar 2000
    Location
    Geneva, IL
    Posts
    364

    Default

    Hi,

    New probe seems to have fixed it.

    Thanks to John Kennedy for the phone input.

    Rich Phillips
    Rich Phillips
    Member #27
    2019 K-2500 Crew Cab Z71
    Cedar Creek Silverback 33RL Fifth Wheel
    In The Past: '82 6.2 Jimmy Blazer, '93 6.5 GMC K-2500, '01 DMAX K-2500, '09 DMAX K-2500

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •