I have the mirrors pictured below and plan on installing them on my 98 K3500 Ext Cab Dually. The mirrors were listed for 99-02 but they dry fit just fine.
The problem is, my truck didn't have the power mirror option. I've also ordered and have the male metri-pack connectors that connect to the 8-way mirror connectors, and the mirror switch/door panel piece, and the harness connector for the switch. The harness connector to the switch is listed as part number PT709.
What I need is like a pinout diagram for the mirror switch so I know how to wire it. I've looked at just about every wiring diagram I culd find, but it doesn't tell me what pins are for what wires on the switch.
I may also need a pinout diagram for the connector on the mirrors (they are stock for the 99-02 trucks). I realize I'll have to manually wire up the heater wires, and that's fine - I can figure that out later.
I've seen various posts from people who have claimed to have wired a custom harness for these, like I want to do, but nobody explained how they did it.
I hve to say, though, that I've foud a great cheap place to buy all these wierd connectors and electrical parts from. It's a site called Mouser - http://www.mouser.com - just thought I'd pass that along in case it's of use to anybody out there.
I could really use some help with this, you know, locating pictures or diagrams or instructions of some sort. For those that have done it and don't post the instructions, if it's some sort of top-secret trade secret, I wouldn't be opposed to donating a small ampunt to bribe someone into doing soe espionage for me LMAO. Thanks!![]()