Up grading to LED 4-4x6"-old high beam is 2 prong (hi & grnd)-new led 3 prong-tried led w/hi & grnd-doesn't work. DRL &low beam works but when switch to hi beam low goes out-old seambeams worked fine. Any ideas?
Up grading to LED 4-4x6"-old high beam is 2 prong (hi & grnd)-new led 3 prong-tried led w/hi & grnd-doesn't work. DRL &low beam works but when switch to hi beam low goes out-old seambeams worked fine. Any ideas?
LED's are polarity sensitive. Hook 'em up backwards and they won't work.
Simply, if the connectors don't match, you have the wrong kit. They can be made to work, but you shouldn't have to do that when it should be right the first time. LED's are polarity-sensitive, as the previous reply states. A correct (or higher quality) replacement wouldn't have this issue.