Results 1 to 20 of 20

Thread: Block identification

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    May 2014
    Location
    us, ga
    Posts
    166

    Default Block identification

    Can someone tell me the year of this engine and if it was a good year or not? Thanks

    12555506
    C280

  2. #2
    Join Date
    Apr 2001
    Location
    CA
    Posts
    13,576

  3. #3
    Join Date
    May 2014
    Location
    us, ga
    Posts
    166

    Default

    So Im guessing March 28, 2000....is this a good block??

  4. #4
    Join Date
    Apr 2001
    Location
    CA
    Posts
    13,576

    Arrow

    Yep.
    It's about as good as GM spray blocks get. It's among the last casting runs GM did. Crack-check protocol is the same as any other, though.
    1985 Blazer 6.2
    2001 GMC 2500HD D/A
    dmaxmaverick@thedieselpage.com

  5. #5
    Join Date
    May 2014
    Location
    us, ga
    Posts
    166

    Default

    So a guy down the street has this longblock for sale. He said it run fine in a 95 dually, but was scavanged and removed after the trans went bad. He ended up with the engine, thought about doing a diesel conversion in his gasser, then gave up hope.

    My question is what is it worth site unseen. He says it runs fine, but who knows. No pump, turbo, intake or accessories. Just longblock.

    I realize it could be a total loser, but it is what it is.

    Whats it worth on the gamble?

    Thanks

  6. #6
    Join Date
    Apr 2001
    Location
    CA
    Posts
    13,576

    Arrow

    I can't tell you what it's worth, but I wouldn't fork over any serious cash without pulling the pan and getting a good look inside. Maybe a cherry. Maybe a lemon.
    1985 Blazer 6.2
    2001 GMC 2500HD D/A
    dmaxmaverick@thedieselpage.com

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •