I recently pickup up a good running 6.2 out of a M1008 and will be using it in my project truck. I would like to keep the dual alternators while switching to normal 12V wiring and starter and also add AC since the truck has it available(and it is serpentine pulley). I was looking into serpentine conversions and did find that some vans had the option for dual alts on 6.5 but no luck tracking one down to look at or get parts from.
Would it be feasible to swap the pulleys on current alternators over to serpentine pulleys along with the normal 6.5 serpentine balancer and water pump? I know I would then have to fab up something to hold the tensioner as well as probably at least 1 idler.