Hello All,

I am on of the users that typically doesn't post and ask questions as most everything has already been answered is you look hard enough. I have come across a problem that I can't find a solution to. I have a 84' K2500 6.2 which is mostly untouched from the factory configuration. A few years ago my father gave me the truck when he finally decided to purchase a new heavy duty. The truck is more sentimental than anything since I grew up with it. I have slowly been fixing issues with the truck as I have time. I would love to eventually get this to 100% reliability and turn it into disaster recovery volunteer vehicle.

To the issue at hand. This truck has always been a reliable starter. It has new 60g glow plugs, new alternator and batteries. I recently was moving the truck and it started up (first try) and died out like it typically does on a cold start with not having run in a month or so. However, after it died out I get nothing out of the truck. The truck will not attempt to turn over, glow plugs will not light (even with manual switch). Nothing. I have checked the batteries, full charge. I replaced a relay on the drivers side firewall with not luck. The relay is getting power from the switch but it is not putting power out. If anyone has thoughts or words of wisdom please chime in.

Also, if anyone lives in the north greater Atlanta area I would love meet up and pick your brain. I have a solid mechanical understanding but don't know the nuances of the 6.2

Thank you all in advance, Chad