ignition switch
After replacing the switch, the steering shaft is no longer able to be bolted to its 2 large bolts under the dash. Further inspection shows that the switch is rubbing the bottom of the dash, and the 2 large nuts which used to hold the steering wheel shaft, no longer reach. It appears the shaft grew an inch or 2. I even looked at the position of the steering box to see if it moved.
Last edited by Warren96; 11-17-2019 at 14:37.
Reason: happy fingers
94 Chev Blazer, 6.5TD, 3.42, 4WD,Gear drive,,Remote FSD behind drivers headlight,,Mobil 1 in difs and trans,Rotella 30W, Over a quarter of a million miles !! Member -1.94 club.
Reply With Quote
