So Friday I had a fishbite and stall episode. Pulled over truck started fine and ran great rest of the day. Saturday truck starts fine, run some errands and proceed to replace water pump and radiator. I had disconnected the positive cables. Got that all done and now the truck won't start.

New PMD and cable
Gutted fss
Have fuel to ffm,out of air bleed,out of drain and to injection pump
Fuel in clear retun line, moves a little when cranking
Tried cranking with optical sensor unplugged and cps unplugged, no difference
Have SES light when cranking. (power to ecm)
No fuel out injector lines.
Tried both pmd without extension harness