Reinstalled my cylinder head on the passenger side, reconnected everything, reinstalled the Racor filter the PO installed, cracked open all eight injectors and started cranking. Fuel weeped out all four injectors on the driver side, and one injector on the left side fuel dropped from one of the rubber “crossover” tubes (going from injector to injector). No leaks from the injector pump fittings, filter is full, I installed a clear line on the return feed from the IP, said clear line is filled with fuel and no bubbles. I only removed the four injector lines to the passenger side, prior to reinstalling I blew brake cleaner both ways through all four of those lines and had a good spray going through.
Any thoughts why I’m not getting fuel to only those four?