Results 1 to 6 of 6

Thread: my 90 dually swap

  1. #1
    Join Date
    May 2020
    Location
    Pierron Il.
    Posts
    8

    Default my 90 dually swap

    I am in the middle of a project, my 90 3500 dually originally had a 454 and 700r someone took it out and put a 350 in it, he passed away and his kids didn't want to finish it so I got it cheap, finished bolting it up and it wouldn't move ends up they swapped tranny also 4l80e out of a 93. I swapped tranny for a good old th400, every thing ran great for about 4 yrs then 350 got sick, I bought a 6.2 out of an 87 ton truck, but when I got it home I ran the numbers and it's an 84 c code. all egr crap was unhooked so I removed it all. now i'm trying to find a y pipe for it but no one lists it, muffler shop can make it no problem but I'll have to haul the truck to town. the manifold outlets are 2" with 2-3/4 flange holes where the later ones are 2-1/4" with 3" flange hole spacing. this truck has the 3" banks exhaust on it already and would like to keep it.

  2. #2
    Join Date
    May 2020
    Location
    Pierron Il.
    Posts
    8

    Default my 90 dually swap

    well I've decided to haul the truck to town when I get it running for exhaust, almost ready to fire up, am adding a gauge cluster because all the sensors work thru the ECM and I eliminated that. Which location would be best for tempature sender in the left front of head or right rear of intake there is senders in both locations.

  3. #3
    Join Date
    Dec 2003
    Location
    Yukon Canada
    Posts
    1,653

    Default

    You could use a stock gauge cluster if you found a diesel wiring harness and swap out the harness.
    But the stock position is in the left front head.
    90 Chev 3500 c/c 4x4,6.2na,400 auto,4:10 gears.DSG Timing gears,main girdle, isspro tach, pyro,boost,oil and trany temp.Dual Tstats, High volume peninsular pump,on shelf, Custom turbo and intercooler 85%complete. Change of plans for the dually, it's going to get a Cummins. Both trucks are Blue 90 4x4 crews

  4. #4
    Join Date
    May 2020
    Location
    Pierron Il.
    Posts
    8

    Default Update

    I've been on this project since May but I was no hurry it's a project and I have more time than money, haha. had it running in June but the fuel kept running back to tank on me. I ended up replacing tank sending unit because I wasn't happy with my modification of original, I used the original two lines off the tank to where the fuel filter was in frame and put a check valve there. My son gave me some 3/8 stainless tubing he had and I made new lines up to engine, quite a job with a hand bender sure looks good though. started and ran about 3 min and died start right back up and die, pulled top off pump and it was full of little black junk, had to pull pump and found governor flex ring dissinagrated, so after a rebuild and reinstalled fired right up today now i have bleed lines leaking if aint one thing it's another.

  5. #5
    Join Date
    Apr 2001
    Location
    Newberg Oregon
    Posts
    12,372

    Default

    Sounds like you are getting the gremlins sorted out

    Be sure you have a good fuel filter in the system
    (1) 1995 Suburban 2500 4x4
    (1) 1997 Astro
    (1) 2005 Suburban (Papa Smurf)
    THIS IS BOW TIE COUNTRY

  6. #6
    Join Date
    May 2020
    Location
    Pierron Il.
    Posts
    8

    Default Update

    I haven't had time to sit down and update, with harvest going on. But my 6.2 swap is running like a sewing machine, i haven't got a VRV for it yet but I just shift it manual, I need to get the right torque converter for it or I may get a 700R so I'll have overdrive but maybe next spring it's a work truck I don't do much highway miles. next thing is changing the front pulley's and convert to a serpatine belt.

Similar Threads

  1. Pondering Engine Swap. Need some questions answered.
    By bgott35 in forum 6.5L Turbo Diesel - Tech Support - Troubleshooting - Performance
    Replies: 6
    Last Post: 08-14-2013, 07:03
  2. Dually SRW swap
    By Wing Nut OOA in forum 1982-2000 C/K Truck & SUV Chassis & Drivetrain
    Replies: 11
    Last Post: 06-19-2009, 13:11
  3. Dually Wheel Swap
    By DTR2214 in forum 2500HD/3500 HD Trucks & Drivetrain
    Replies: 1
    Last Post: 09-17-2008, 15:52
  4. Duramax swap into 86 dually
    By Dick Wagner in forum Duramax Diesel Performance Shop
    Replies: 3
    Last Post: 07-22-2004, 07:21
  5. Dually swap
    By NH2112 in forum 6.2L Diesel - Tech Support - Troubleshooting - Performance
    Replies: 5
    Last Post: 11-14-2003, 20:14

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •