Results 1 to 3 of 3

Thread: Connector help.

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Feb 2006
    Posts
    185

    Default Connector help.

    Tried to attach a print of the wiring diagram for the HVAC on my '93 C2500. In it you can see connector C209 and what looks like two GM part nos. for each connector half. 12034481 and 12034482. Did a search and keep getting a msg. saying not a valid GM no. on the internet. This connector is buried behind the HVAC control panel and that panel kept blanking out and finally quit. Pin 150 carries all the ground current for the cont. panel and the blower motor and it had become contaminated with the green cancer and overheated. Melted a large hole right in the middle of the connector. I did a good repair on that wire and had to bypass that line away from the connector. I'd like to keep this good old truck in it's original condition as much as possible and was wondering if anyone knew of a source for GM connectors this old? I figure a junk yard part will likely be in similar 27 yr. old condition.
    Attached Images Attached Images

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •