Results 1 to 4 of 4

Thread: looking for injection pump mounting stud

  1. #1
    Join Date
    Jan 2020
    Location
    Jax Beach USA
    Posts
    4

    Default looking for injection pump mounting stud

    hi there

    i'm replacing my 90 vans injection pump and the top mounting stud is a little rough. Ive done a search and its hard to find one. I'm assuming that its got to be out there somewhere. maybe not.
    ...just thought someone might be a able to shed some light on this! Thanks!

  2. #2
    Join Date
    Apr 2001
    Location
    CA
    Posts
    13,573

    Default

    I've never seen them available as a separate piece. You may try matching one at the hardware/home store. Or clean it up (un-rough it). Otherwise, you'll be on the hook for a timing cover and the labor involved.

    Realistically, its function is very simple. If it's able to do that at a minimum, I wouldn't worry about it.
    1985 Blazer 6.2
    2001 GMC 2500HD D/A
    dmaxmaverick@thedieselpage.com

  3. #3
    Join Date
    Jan 2020
    Location
    Jax Beach USA
    Posts
    4

    Default

    Thank you. i feel better about cleaning it up and reusing it. it should hold just fine.

    i believe i found a part number - if its the same one used in the 6.5, in case anyone ever takes up the search

    GM 10024396

  4. #4
    Join Date
    Apr 2001
    Location
    CA
    Posts
    13,573

    Default

    Thanks for identifying it. There should be no difference between the 6.2 and 6.5 studs (the timing covers are interchangeable, except for the crank sensor). Unfortunately, it isn't available anywhere I could find. Fortunately, it is the same stud used in several places on the same engine, as well as many other GM applications (such as tranny adapter to engine), and that can be found.
    1985 Blazer 6.2
    2001 GMC 2500HD D/A
    dmaxmaverick@thedieselpage.com

Similar Threads

  1. NEW ENGINE AND PUMP INSTALLED.PUM IS losing injection pump prime, is THIS A bad PUMP?
    By asabadin in forum 6.5L Turbo Diesel - Tech Support - Troubleshooting - Performance
    Replies: 20
    Last Post: 03-04-2005, 06:37
  2. Vacuum pump (pod style) mounting gasket
    By mdregister in forum 6.2L Diesel - Tech Support - Troubleshooting - Performance
    Replies: 4
    Last Post: 09-10-2004, 16:25
  3. Stud Girdle Kit and Oil Pump Questions (98+ pumps)
    By john8662 in forum 6.5L Turbo Diesel - Tech Support - Troubleshooting - Performance
    Replies: 10
    Last Post: 05-30-2004, 13:24
  4. Injection Pump Mounting Flange Nuts Missing
    By tloomis in forum 6.5L Turbo Diesel - Tech Support - Troubleshooting - Performance
    Replies: 3
    Last Post: 08-04-2003, 00:01
  5. Stud #1 - Stud #2 Fuse Box Question
    By 56Nomad in forum 2500HD/3500 HD Trucks & Drivetrain
    Replies: 8
    Last Post: 12-14-2002, 18:15

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •