Results 1 to 4 of 4

Thread: Wanted - AC Brackets for 6.2 (top driver's side mounting)

  1. #1
    Join Date
    Aug 2021
    Location
    Los Angeles, CA
    Posts
    26

    Default Wanted - AC Brackets for 6.2 (top driver's side mounting)

    Hello, I am looking to purchase the mounting brackets and hardware for an air conditioner compressor for a 6.2 engine. I am attaching a picture that shows the parts I am hoping to find. There are:
    - four brackets
    - a "support"
    - the AC hose (that bolts to the compressor)
    - a handful of nuts and bolts.
    - I would be willing to purchase the compressor as well, but not needed

    My van originally came without an AC. I recently bought another van to swap the dash and AC components. The "donor" was a gasser and the compressor/brackets are different so I am looking to find the parts I need to complete the project. The compressor mounts on the top driver's side of the engine. Thank you!AC Parts Diagram with notes.jpg
    1992 Chevy G20, 6.2 NA

  2. #2
    Join Date
    Dec 2003
    Location
    Yukon Canada
    Posts
    1,612

    Default

    I have an 81 6.2 that i just pulled from a blazer that burnt.
    It had AC.
    I would sell the bracketry if it works for you.
    I did notice the bracket that is on the exhaust manifold is a little different than the picture.it is shorter.
    No hose or compressor
    90 Chev 3500 c/c 4x4,6.2na,400 auto,4:10 gears.DSG Timing gears,main girdle, isspro tach, pyro,boost,oil and trany temp.Dual Tstats, High volume peninsular pump,on shelf, Custom turbo and intercooler 85%complete. Change of plans for the dually, it's going to get a Cummins. Both trucks are Blue 90 4x4 crews

  3. #3
    Join Date
    Aug 2021
    Location
    Los Angeles, CA
    Posts
    26

    Default

    Thank you for responding! I will send you a private message.
    1992 Chevy G20, 6.2 NA

  4. #4
    Join Date
    Aug 2021
    Location
    Los Angeles, CA
    Posts
    26

    Default

    Yukon, thank you for reaching out. That was very cool!

    Unfortunately the brackets that Yukon had were not going to fit my vehicle and I am still in the market to buy a set that will. Thank you.
    1992 Chevy G20, 6.2 NA

Similar Threads

  1. Wanted 6.2 or 6.5 engine brackets '88-'95
    By oilburnertoo in forum TDP Classified ad forum
    Replies: 2
    Last Post: 12-17-2009, 18:39
  2. IFS Oil leak Driver's side
    By JohnC in forum 1982-2000 C/K Truck & SUV Chassis & Drivetrain
    Replies: 24
    Last Post: 02-20-2007, 15:40
  3. IFS Oil leak Driver's side
    By JohnC in forum 6.5L Turbo Diesel - Tech Support - Troubleshooting - Performance
    Replies: 0
    Last Post: 02-12-2007, 13:32
  4. Help ! Accessory Mounting Brackets
    By twano in forum 6.5L Turbo Diesel - Tech Support - Troubleshooting - Performance
    Replies: 1
    Last Post: 03-04-2005, 07:50
  5. Low Air Flow Driver Side Vent
    By TC in forum 2500HD/3500 HD Trucks & Drivetrain
    Replies: 2
    Last Post: 08-14-2002, 12:06

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •