Code:
Car Scanner ELM OBD2
DTC report
Selected brand: Chevrolet
============1==============
P0601
Raw code: 0601
ECU: 10
Status: Pending
OBDII: Engine control module (ECM) - memory check sum error
============2==============
P0601
Raw code: 0601
ECU: 10
Status: Confirmed
OBDII: Engine control module (ECM) - memory check sum error
============3==============
U1000
Raw code: D000
ECU: 10
Status: Pending fault present, Pending fault present during this driving cycle, Test is inhibited by other DTC, Test has not been completed, Validated fault present at time of request
OBDII: Class 2 Communication Malfunction
============4==============
P1218
Raw code: 1218
ECU: 10
Status: Pending fault present, Pending fault present during this driving cycle, Test conditions are met, Test is inhibited by other DTC, Validated and stored in non volatile memory
OBDII: CID High
Chevrolet: Injection Pump Calibration Circuit
============5==============
P0601
Raw code: 0601
ECU: 10
Status: Pending fault present, Pending fault present during this driving cycle, Test conditions are met, Test is inhibited by other DTC, Test has not been completed, Validated and stored in non volatile memory, Validated fault present at time of request, Validated fault has been present during this drive cycle
OBDII: Engine control module (ECM) - memory check sum error
============6==============
P0228
Raw code: 0228
ECU: 10
Status: Pending fault present, Pending fault present during this driving cycle, Test conditions are met, Test is inhibited by other DTC, Test has not been completed, Validated and stored in non volatile memory, Validated fault present at time of request, Validated fault has been present during this drive cycle
OBDII: Throttle position (TP) sensor C/accelerator pedal position (APP) sensor C - high input
============7==============
P0223
Raw code: 0223
ECU: 10
Status: Pending fault present, Pending fault present during this driving cycle, Test conditions are met, Test is inhibited by other DTC, Test has not been completed, Validated and stored in non volatile memory, Validated fault present at time of request, Validated fault has been present during this drive cycle
OBDII: Throttle position (TP) sensor B/accelerator pedal position (APP) sensor B - high input
============8==============
P0215
Raw code: 0215
ECU: 10
Status: Pending fault present, Pending fault present during this driving cycle, Test is inhibited by other DTC, Test has not been completed, Validated and stored in non volatile memory, Validated fault present at time of request
OBDII: Fuel shut-off solenoid - circuit malfunction
============9==============
P0122
Raw code: 0122
ECU: 10
Status: Pending fault present, Pending fault present during this driving cycle, Test conditions are met, Test is inhibited by other DTC, Test has not been completed, Validated and stored in non volatile memory, Validated fault present at time of request, Validated fault has been present during this drive cycle
OBDII: Throttle position (TP) switch A/accelerator pedal position (APP) switch A - low input
============10==============
P0601
Raw code: 0601
ECU: 10
Status: Pending
OBDII: Engine control module (ECM) - memory check sum error
============11==============
P0601
Raw code: 0601
ECU: 10
Status: Confirmed
OBDII: Engine control module (ECM) - memory check sum error
============12==============
P0601
Raw code: 0601
ECU: 10
Status: Pending
OBDII: Engine control module (ECM) - memory check sum error
============13==============
P0601
Raw code: 0601
ECU: 10
Status: Confirmed
OBDII: Engine control module (ECM) - memory check sum error