What psi should I be looking for in an electric lift pump?

I'm deleting the mechanical lift pump and going with a firewall mounted Facet Duralift, before the spin on fuel/water separator. What appeals to me about this pump is that it's designed to pull. It can pull 120 inches vertical and are used on reefer trailers so I figure they must be reasonably reliable.

But I haven't the vaguest idea what psi it should be. It comes in 4-7 psi or 9-11 psi.

While I can't find any 6.2 applications of this pump, there are plenty of International IDI guys using this lift pump with the DB2. Some use the lower pressure with no problems, others use the higher pressure pump and a regulator after the pump to dial it in.

My vehicle is a 1983 C20 6.2 non turbo. The only thing I ever tow is the occassional utility trailer and I'm told I drive like an old lady; I can count on one hand the number of times I've exceeded 2,000rpm.

Thoughts?

https://www.pegasusautoracing.com/gr...oupID=DURALIFT