I have a 1982 c20 with 6.2 diesel. In the process of rewiring with universal harness any advice greatly appreciated.
Newbie
1982 c20 6.2 diesel complete rewiring
I have a 1982 c20 with 6.2 diesel. In the process of rewiring with universal harness any advice greatly appreciated.
Missy Good Wench ( Moderator)
Hi
A bit more specifics....Entire truck or just the engine ????
(1) 1995 Suburban 2500 4x4
(1) 1997 Astro
(1) 2005 Suburban (Papa Smurf)
THIS IS BOW TIE COUNTRY
Newbie
The entire truck, I have a universal harnessOriginally Posted by Robyn
Enthusiast
Take your time...
lay out the harness on a big flat area to get familiar with it.Personally i would make notes and tag groups of wires heading to each area of concern.
The wiring on an old truck like an 82 is pretty simple,Why are you replacing the stock wiring with a universal harness?
90 Chev 3500 c/c 4x4,6.2na,400 auto,4:10 gears.DSG Timing gears,main girdle, isspro tach, pyro,boost,oil and trany temp.Dual Tstats, High volume peninsular pump,on shelf, Custom turbo and intercooler 85%complete. Change of plans for the dually, it's going to get a Cummins. Both trucks are Blue 90 4x4 crews
Newbie
Shorted out. Had fire
Missy Good Wench ( Moderator)
Yeah....That will do it......
Do some looking on places like ebay and scare up a factory wiring book..
These will get you spot on.....
(1) 1995 Suburban 2500 4x4
(1) 1997 Astro
(1) 2005 Suburban (Papa Smurf)
THIS IS BOW TIE COUNTRY
Posting Permissions
Reply With Quote