Results 1 to 4 of 4

Thread: Tty bolts vs studs.....yeah....another thought.

  1. #1
    Join Date
    Apr 2001
    Location
    Newberg Oregon
    Posts
    12,274

    Default Tty bolts vs studs.....yeah....another thought.

    I was listening to an interesting video by Gale Banks the other day.

    https://www.youtube.com/shorts/pySyCI1lRq8

    Banks is not a backyard hacker like so many outfits that sell goodies for the various diesel engines.....

    I am of the mindset that using head studs on the 6.5 may well be a waste of time....And very possibly counter productive....

    The 6.2/6.5 was engineered to do a particular job and produce a specific amount of power/torque

    Head gasket issues are not really a big deal until the idea of adding far more boost and fuel to the package than it was ever designed for came along.

    Even the Herky 6.7 Cummins can be destroyed by the power hungry crowd...

    My Son in law recently had to get the 6.7 in his big dog in the shop for a head gasket job....and it is not being tweaked all that hard.

    Just some things to ponder.

    The AMG P400 does not use head studs......If the TTY bolts were really an issue.....These guys would have dropped them in the trash years ago....


    I think back to my days in the performance boat world....

    An old saying comes to mind...."If it ain't moving...something is breaking"

    When an engine is taken waaaaaaaaaaaaaaaay beyond the design envelope it will eventually fail.....And usually no manner of goodies will hold it together for very long.

    Even the mighty Dmax will go away....Head gaskets can and do fail on these too.....


    Just some thoughts.....
    (1) 1995 Suburban 2500 4x4
    (1) 1997 Astro
    (1) 2005 Suburban (Papa Smurf)
    THIS IS BOW TIE COUNTRY

  2. #2
    Join Date
    Feb 2000
    Location
    Montana
    Posts
    11,375

    Default

    Yup.. Here's a link to a post I made a while back about this.

    https://www.thedieselpageforums.com/...296#post336296

    What we need are serious data about which is best - long-term and under a variety of uses (i.e. stock vs high perf). ARP is in a good position to collect that data... if it was in their interest to do so.

  3. #3
    Join Date
    Oct 2001
    Location
    Granby, Missouri, USA
    Posts
    3,077

    Default

    The guys over at Quadstar Tuning have been using head studs for several years now with great success. I've been following them for a few years, and have been impressed with what I've seen. They don't follow the typical hokey 6.5L aftermarket stuff (like bypass cooling mods and such), but seem to really know what they're doing.

    Casey
    1995 K1500 Tahoe 2 door, 6.5LTD, 4L80E, NP241, 3.42's, 285/75R16 BFG K02's; 1997 506 block; Kennedy OPS harness, gauges, Quick Heat plugs, and TD-Max chip; Dtech FSD on FSD Cooler; vacuum pump deleted, HX35 turbo, Turbo Master, 3.5" Kennedy exhaust, F code intake; dual t/stats, HO water pump, Champion radiator; Racor fuel filter

  4. #4
    Join Date
    Feb 2000
    Location
    Montana
    Posts
    11,375

    Default

    Quote Originally Posted by arveetek View Post
    The guys over at Quadstar Tuning have been using head studs for several years now with great success. I've been following them for a few years, and have been impressed with what I've seen. They don't follow the typical hokey 6.5L aftermarket stuff (like bypass cooling mods and such), but seem to really know what they're doing.

    Casey
    Our 6.5TD Project truck accumulated nearly 300K miles over 7 years, using Fel-Pro factory equivalent TTY head bolts and Fel-Pro head gaskets. This was a performance engine, in a truck used to tow most of those miles. There were no head gasket problems during the time we had it. I don't know what else I can say to prove the case for TTY head bolts and Fel-Pro head gaskets (and a correct installation). That said, it's not my intention to discourage anyone from installing head studs. I'd simply like to see some real-world long-term data to compare, before suggesting that the far more expensive studs actually provide some tangible benefit.

    I used factory TTY head bolts in Lil Red's Duramax head gasket replacement project in late summer 2021 and in Sarah's fall 2021 6.5TD build for her 1994 Blazer, and feel extremely confident in doing so. Extremely...

    Incidentally... I learned during the two Duramax head gasket projects here at TDP in 2021 that the final torque for the ARP head studs was identical to that produced by the factory TTY head bolt torque-angle setting. I used a torque wrench to install the TTY head bolts so I could measure final bolt torque during the final torque angle sweep. I was curious... This final torque value for either the ARP studs or the factory TTY head bolts for the Duramax wound up being 125 ft/lbs - identical between the ARP studs and what the torque angle setting wound up producing for the GM factory TTY head bolts. So... there is no more/less clamping load whether using TTY bolts or ARP studs. I found that very interesting...

    One of those Duramax 6600 head gasket projects I completed in mid 2021 included ARP head studs. I felt like I needed the experience, so I could add more to a discussion comparing studs/TTY. In so far as having an opinion about studs/TTY for the Duramax at this point 2-1/2 years into it, the only difference I can positively identify is that I spent $418* more for the ARP studs than I would have for TTY bolts. Jim Bigley

    * current 1/26/2024 price difference - $613 for the ARP-2000 Duramax head stud kit at Amazon and $195 for 36 TTY head bolts at Merchant-Automotive.
    Last edited by More Power; 01-26-2024 at 16:26.

Similar Threads

  1. 6.2 TTY or Arp Studs?
    By 2INSANE in forum 6.2L Diesel - Tech Support - Troubleshooting - Performance
    Replies: 3
    Last Post: 11-02-2020, 09:36
  2. Water pump studs/bolts
    By 94redrebuild in forum 6.5L Turbo Diesel - Tech Support - Troubleshooting - Performance
    Replies: 6
    Last Post: 12-12-2016, 05:03
  3. Main Bearing Cap Bolts - TTY?
    By BobQ in forum 6.2L Diesel - Tech Support - Troubleshooting - Performance
    Replies: 3
    Last Post: 12-27-2010, 07:09
  4. ARP HEAD STUDS or STOCK HEAD BOLTS
    By 9365turbo in forum Duramax 6600
    Replies: 21
    Last Post: 03-31-2010, 12:50

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •