Results 1 to 2 of 2

Thread: injector pump adjustment question

  1. #1
    Join Date
    Mar 2000
    Location
    Auburn, WA
    Posts
    15

    Post

    I'm swapping a '81 J engine into a '91 suburban that had a C engine and I need a little advice on the electrical connections on the injector pump. On the passenger side of both the old and the new pump is a black puck shaped object which is attached to the injector with two fasteners. The holes in the puck shaped object are slotted implying it can be adjusted. I'm thinking about transfering the '91 "puck" to the "81 engine because the '91 puck has an electrical connection to mate with the wiring harness that the '81 doesn't. What is the black puck? and how would you adjust it after swapping them?
    Or should I swap them?
    Thanks, Terry

  2. #2
    Join Date
    Oct 2001
    Location
    Finland
    Posts
    33

    Post

    I think it's somekind throttle position sensor or switch (in my 84 engine it's switch) electricity for torcue conventer clutch solenoid goes thru that, i don't have adjustment Guide, but i think switch should be open when engine idles
    1995 Suburban K2500

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •