The other night my buddy was installing the deep Allison pan, which calls for 18-22 ft/lbs of torque on the bolts. well my torque wrench decided to take a dump on him and not work...end reslut, 1 bolt stripped in bottom of old Ally!
we installed the deep pan as other bolts were unaffected and the problem one has about 1 thread keeping it in there....it hasn't leaked a drop and i doubt it will but was wondering if we should:
1) leave it alone
2) tap a bit larger
3) helia coil (sp?) - i've done that on old VW heads before with good results..
