Patent issues, or?
Patent issues aside, thinking building one for personal use would be cool.
It would have to have some quality bearings. Compressed air, even tapped from turbo compressor, and oil pressure to spin device would work, higher the rpm's the better unit will work.
I'm guessing the unit does not fill up with oil because it works on centrifugal force so a big drain is needed.
I see lots of big machines use this device in concert w/filters so it has value in the oil cleaning department.
99 GMC SUB, 2500, 4x4, 6.5 TD (F) #H32 enhanced blk, Phaser timing set, B&D IC, 3" ATS exh, K&N w/prefilter, 4WD NVG 246, 4L80E kevlar Transgo off road/tow mods/B&M supercooler, 14 FF MagTec w/locker 3.42:1, 9.25" IFS frt/diff 3.42:1 w/ARB locker, AutoMeter Boost & pre-turbo pyro meter, 12,000 lb hydro winch, Warn classic bumper w/brushguard & diesel scoop, Max E-torq Stage 3, hi pop inj, oil bypass sys, on board air comp for front ARB locker & tire inflation, DynaView driving/auto-cornering lts, DZ nerfs, A/T 285/75/16 SilentArmor 3750 lb rated on 3750 lb rated Alcoa, 3 IP drivers 2 r spares.