Got a 01 with 190000 + miles and time to do head gaskets, looking for any tips, where to get parts and tools and maintenance tips for this job.
Thanks!
Got a 01 with 190000 + miles and time to do head gaskets, looking for any tips, where to get parts and tools and maintenance tips for this job.
Thanks!
As it stands right now, your best bet for srvice info would be the factory service manuals. All tools, sealants and procedures are called out in the manual. I'll be doing a Duramax head gasket replacement before long, and the related story will appear here in the Page once completed.
Jim
Contact Me
Lil Red - Duramax 6600 Conversion
Content Web Site
The Diesel Page - 6.2L/6.5L Diesel Books
The 6.2L/6.5L Troubleshooting & Repair Guide
Duramax Diesel Conversion Guide
Duramax Diesel Service Guide - How to Replace Head Gaskets, Injectors, Water pump, and more - New!
Photo Album
TDP Youtube Channel - New!
have an 02 Lb7, just put head gaskets on mine, have part #s and list of tools you need, most expensive tool is a inj. sleave puller, it is a little pricey but worth every dollar! works great, Eddie
If you get set up to where i can send you a private message, will be happy to give you my number and tell you all about it! just a few tricks to know, as i said been there done that! Eddie
Can anyone point me in the right direction when it comes to service manuals? I have tried Helm, Inc. and ebay, both with no results. Any other good sources?
1991 Chevrolet Silverado 3500, 6.2L. 125,000 miles -Sold
2007 Chevrolet Silverado LBZ - R.I.P
2001 Chevrolet Silverado LB7-- Sold
2011 GMC Sierra, LML- 39,000 miles. All stock
You can send any info to rikbrowner@aol.com, could also send ya a phone number, would be nice to talk to some one who has done this. Me I'm a helicopter mechanic, should be able to do this with a manual, tools and some time!
Thanks
Did you get your manuals from a Dealer? I tried www.alldatadiy.com
found some good info on part numbers but not much on heavy maintenance (head gasket replacement)
There's only 2 places to get original "factory" manuals (other than used from Ebay, etc.). www.helminc.com (books), and www.alldatadiy.com (online subscription). Both are exactly the same, only Alldata is updated frequently after purchase. Choose your convenience, according to your wallet. I prefer the searchable database of Alldata, and it's much more compact. A LOT less $$, too. If you didn't find R/R/R procedures at Alldata, you didn't look in the right place. I use it for several models nearly every day.
The Haynes and Chilton manuals are very useful if rolled up and stored in the water closet.
You might try a few of the diesel magazines. DieselWorld or DieselPower did a tech article on head gasket replacement. I know you have to replace the studs because they stretch during install. Also need to pay attention to gasket size. I believe there are 4 different sizes. Anyway the article lists part numbers and even the speciality tools that are required. Really good info with lots of tech data. Just my 2 cents worth. Good luck. Tim
there are 4 different sizes if you need to know how to tell them apart let me know i have the stamp pattern and all the info that you will need i am a GM Master Diesel Tech
I've got alldata pro and wouldn't go back to paper manuals. GM releases service manual updates quite often and you won't find those in the book.
Also let me know if you want to do studs as I sell ARPs.
Head gasket replacement
http://www.youtube.com/watch?v=2W1ZwbxbSJI
Here's another good reference ..
http://www.mastertechmag.com/pdf/200...gmcduramax.pdf
Bill
03 2500HD D/A CC/SB/4WD,OilGuard, MegaFilter,LiftPump/PreFilter, Bilsteins,RetraxRollTop,J&J Boards,Coolant Filter,AlliDeepPan,FastIdle,AllHeadLightsOn,
98 K3500 6.5,SOLD
Owner, Phil's Auto Clinic, Hemet, CA, 1997 Napa/ASE tech of the year
2001 D/A Crew cab long bed, Edge Juice w/Attitude Monitor, Banks Exhaust, S&B intake, BD exhaust manifold, 152k miles, 2nd set of injectors 06/25/07
2000 Powerstroke Ford Club cab short bed, Edge Juice w/Attitude Monitor, 5" exhaust, S&B intake