Make it easy to dispense fuel additive...

[Inspector]

Dmaxprof:

That bottle is very similar to the bottle that I described in the above post.
The one that I use has the same type of bottle on a bottle and is marked off in ounces 1 thru 4. By tipping over the bottle, fluid will fill the attached bottle to exactly 4 ozs. Being marked off 1 oz increments makes easy to dispense in lessor amounts for maybe a half tank of fuel.
It works very well for me.
Denny

[WILLYD-MAX]

The Sta Bil bottle works good. Amsoil's newest additive comes in 16 oz. bottles with a long skinny neck with clear marks every 2oz and a treat rate of 1oz per 5 gal. works real well also.

[SDakDmax]

I've been using teh Sta-Bil bottle for years now. I recently added another and filled it with my 2 stroke mix oil to help with that and eliminate the measuring cup and collecting dust...

So John, everyone seems to have a different mix ratio for the 2 cycle oil, at what rate do yoiu mix??

[tommac95]

You may be OK with that , particularly on the Perkins ... i think there was an old VW prescription to add a little gas to diesel for antigelling.
But i wouldn't add anything thinner than kero to diesel fuel , Kero also to anti gel. And whenever adding a thinner , a lubricity additive is prudent for wear aspects.

[jbplock]

Interesting Thread!

I’ve also used STABIL bottles as well as graduated 8 & 16oz (stanadyne) plastic bottles for dispensing fuel additives but as this thread points out, there must be a better way.

The link DmaxProf posted offers has some interesting possibilities for a “calibrated” dispenser.

1 gallon jug pump delivers 1 oz. per stroke



Dispense 1 oz per stroke

The plunger draws liquid through plastic vinyl tubing from any size container. It has a 3/8 OD intake and discharge. (could get carried away with this one.. …hmmm.. plumb to the fuel filler tube ?? )
--------------------------------------------------------------

This one found with Google looks good ... similar to the STABIL bottle except it dispenses 1-6 oz
WirthCo - tip and pour measuring container
... also listed on the site DmaxProf pointed us to .. Prop R Measure

[pmkid]

Hello,

I know this is an old topic but take a look at the EzyPor it works great with my additive.