Yukon, thanks for the response. The idea of using a bolt/accessory holes on the front of the engine is a good idea. In the van, the engine sits back pretty far relative to the opening from the hood. It would be difficult to use the come-along and any connection on the top of the engine. Using a bolt from the front of the engine seems possible. Between that and the come-a-long I think I would be able to come up with something to lift if from the top. Although I think I would have to remove a fair amount of stuff in order to hook it all up. I also tested getting 2x4's to the pan rail. This is also something that could work. I should be able to get the job done at this point. Thank you for the help.