Hello Members.
I am new to the page and am in search of a dual idler gear drive for my 1994 6.5 Turbo Diesel.
DieselPro does not make them any more and I am wondering where I can find one- New or used.
Any advice would be appreciated.
Thank you
Newbie
Dual Idler Gear Drive search
Hello Members.
I am new to the page and am in search of a dual idler gear drive for my 1994 6.5 Turbo Diesel.
DieselPro does not make them any more and I am wondering where I can find one- New or used.
Any advice would be appreciated.
Thank you
Proud Deplorable Garbage
Well, you just took one step. Maybe someone who has one will read your post. You could also try contacting some of the vendors in the vendor's section. There's also a classified section you can post in.
Good luck!
The Constitution needs to be re-read, not re-written!
If you can't handle Dr. Seuss, how will you handle real life?
Current oil burners: MB GLK250 BlueTEC, John Deere X758
New ride: MB GLS450 - most stately
Gone but not forgotten: '87 F350 7.3, '93 C2500 6.5, '95 K2500 6.5, '06 K2500HD 6.6, '90 MB 350SDL, Kubota 7510
Missy Good Wench ( Moderator)
I just checked Kennedy diesel web site....I did not see a timing set...
Leroy Diesel.com does show this product
https://leroydiesel.com/products/tim...ming-gear-set/
(1) 1995 Suburban 2500 4x4
(1) 1997 Astro
(1) 2005 Suburban (Papa Smurf)
THIS IS BOW TIE COUNTRY
Newbie
Thanks for the help!
Missy Good Wench ( Moderator)
Glad to help
Hope those guys can getcha taken care of...
(1) 1995 Suburban 2500 4x4
(1) 1997 Astro
(1) 2005 Suburban (Papa Smurf)
THIS IS BOW TIE COUNTRY
Supporting Vendor
Here is my standard email response re: Gear Drives:
The original gear drives were made for DSG by Pete Jackson in USA. Back around 2008 era Pete Jackson closed the doors for good. Since then efforts have been made to have these gears produced by other mfrs. Unfortunately the manufacturers being selected are overseas as in China or India. The quality simply is not there so DSG discontinued the line. I have seen one seller that is still marketing a gear drive, but it is so obvious to me that it is substandard overseas product that I would not touch it with a 10 foot pole. My best advice is to go with a quality chain and gears. Cloyes has always had a reputation for being good.
The original gear drives were made for DSG by Pete Jackson in USA. Back around 2008 era Pete Jackson closed the doors for good. Since then efforts have been made to have these gears produced by other mfrs. Unfortunately the manufacturers being selected are overseas as in China or India. The quality simply is not there so DSG discontinued the line. I have seen one seller that is still marketing a gear drive, but it is so obvious to me that it is substandard overseas product that I would not touch it with a 10 foot pole. My best advice is to go with a quality chain and gears. Cloyes has always had a reputation for being good.
Kennedy Diesel-owner
More than just a salesman-I use and test the products that I sell on a daily basis!
Superflow Lie Detector in house
2002 Chev K2500HD D/A CC Long LT 11.77@ 124mph at 7700# fuel only-e.t. needs help
2005 Chev K3500SRW D/A CC Long LT(SOLD)
2007 Chev K2500 Classic EC Short LT (Sold)
2012 GMC K3500SRW D/A CC Long LTZ Happy Birthday to me! Built 1 working day after my birthday and delivered 7 days later.
2016 GMC K3500SRW D/A CC short LTZ
Custom tuning in house using EFI Live tuning software!
Posting Permissions
Reply With Quote
