Results 1 to 3 of 3

Thread: Steering box Inlet hose

  1. #1
    Join Date
    Mar 2002
    Location
    Kanata Ont.
    Posts
    134

    Default Steering box Inlet hose

    Perhaps a silly question, but I seem to be stuck on this....replacing the Steering box inlet hose that runs down from the hydroboost. How on God's green earth does one access the fitting on the top of the steering box? Based on the replacement hose, the fitting is an 18mm. But I can't get a wrench, crowfoot or anything in there to save my life. Tried from below, from top, from the LF wheel well. My last option is to remove the fan shroud and try that route. Any thoughts would be appreciated!

    Chris
    2002 2500HD Crew Cab 4X2 D/A

  2. #2
    Join Date
    Jan 2006
    Location
    cleveland tx
    Posts
    2

    Default

    I removed the tire fender well and the boost tube
    2002 2500 HD LT 6 Gun Bundle installed since 2004 stays on #6, DEI Canyons with 295-70-17 2008 LTZ still stock

  3. #3
    Join Date
    Feb 2000
    Location
    Montana
    Posts
    11,382

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •