Results 1 to 6 of 6

Thread: Rear axle nut size dana S110 (hd2)

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 05-26-2013, 08:24 #1
    Braveheart
    Braveheart is offline Enthusiast
    Join Date
    Feb 2008
    Posts
    31

    Default Rear axle nut size dana S110 (hd2)

    Cannot believe that no one has asked this before...should be very helpful to the community. Dana says the MD hubs are OE specific for the S110. GM manual kindly lists all of the available 8points in the MD service kit from 3" ish to 3 7/8", so no help there.

    I'd like to replace my rear hub seal on my c4500 (failed at 10,000 miles ...so much for this being a good design), but don't want to tear it down and then realize that I don't have the tool. I have a rear disc and caliper sliders if that's important.

    Anyone know the size of the rear axle hub lock nut?
    Last edited by Braveheart; 05-26-2013 at 08:53.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules