Results 1 to 3 of 3

Thread: Pyrometer Install

  1. #1
    Join Date
    Mar 2007
    Location
    Pacific Northwest
    Posts
    740

    Question Pyrometer Install

    Quick question. I am installing the Pyrometer probe on a customers 2006 C-4500. The paperwork shows the probe installed in the right exhaust manifold. My problem is that the probe is too long. Do they make a shorter probe for this application. The probe is about 3 inches long and the kit is an ISSPRO kit.
    1998 Chevy k-2500 454 147,000 miles and climbing!

    1993 Pontiac G/A Big Block 3.3 Liter 140,000 miles and still going too!

  2. #2
    Join Date
    Mar 2008
    Posts
    6

    Default

    too long as in it hits the other side of the manifold? you can also put it in the downpipe but it'll be about 150-200* lower.
    Kyle
    Banks, Edge, PPE, Hypertech, ATS, BD Diesel, Silverline, MBRP, Magnaflow, Mag-Hytec, Air Dog fuel systems, Titan and Transferflow fuel tanks, and many many more.

  3. #3
    Join Date
    Mar 2007
    Location
    Pacific Northwest
    Posts
    740

    Thumbs up

    The customer brought me a different probe. He was able to get an adjustable length probe. Thanks for the reply.
    1998 Chevy k-2500 454 147,000 miles and climbing!

    1993 Pontiac G/A Big Block 3.3 Liter 140,000 miles and still going too!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •