Remove OPS
Hi guys
I have a suspect oil pressure gauge in my '97 C2500
Looking to fit manual gauge so my question is can I remove OPS and put manual gauge feed in there. I know I'll need to find another power source for the lift pump so what would be my best option for that?
Would disconnecting the OPS cause any other issues?
1997 Sierra 2500 Std cab, 6.5ltrTD, pretty much stock.
Remote PMD, #9 resistor, dual lift pumps, new GM8 turbo, manual waste gate,10lbs boost, 2.5" cross pipe, 3" dump chamber, no cat, 4" turbo back exhaust