Results 1 to 7 of 7

Thread: Bracket?

  1. #1
    Join Date
    May 2014
    Location
    us, ga
    Posts
    166

    Default Bracket?

    Anyone know where this thing goes? Thanks!!!

    http://s1097.photobucket.com/user/ch...bfomg.jpg.html

  2. #2
    Join Date
    Apr 2001
    Location
    Newberg Oregon
    Posts
    12,282

    Default

    Between the block and the motor mount bracket that bolts to the block.

    What year truck ???

    The tranny to engine stabilizer rods bolt to the one side on the GMT400 TRUCKS and that triangle spacer without the attachment point goes on the side where the IFS front diffy sits,

    Just a spacer.
    (1) 1995 Suburban 2500 4x4
    (1) 1997 Astro
    (1) 2005 Suburban (Papa Smurf)
    THIS IS BOW TIE COUNTRY

  3. #3
    Join Date
    May 2014
    Location
    us, ga
    Posts
    166

    Default

    The truck is 95 2wd the engine is an 07 Optimizer

  4. #4
    Join Date
    May 2014
    Location
    us, ga
    Posts
    166

    Default

    I dont remember any tranny/engine stabilizer rods?? Do I need that spacer?

  5. #5
    Join Date
    Apr 2001
    Location
    Newberg Oregon
    Posts
    12,282

    Default

    There should be two of them.

    yes you need them
    (1) 1995 Suburban 2500 4x4
    (1) 1997 Astro
    (1) 2005 Suburban (Papa Smurf)
    THIS IS BOW TIE COUNTRY

  6. #6
    Join Date
    May 2014
    Location
    us, ga
    Posts
    166

    Default

    And what about the engine/stabilizer rods?

  7. #7
    Join Date
    Apr 2001
    Location
    Newberg Oregon
    Posts
    12,282

    Default

    2wd likely does not use them.

    What came out ???
    (1) 1995 Suburban 2500 4x4
    (1) 1997 Astro
    (1) 2005 Suburban (Papa Smurf)
    THIS IS BOW TIE COUNTRY

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •