TheDieselPage.com Forums
 
The Diesel Page Forums

2019 - TDP's 23rd Anniversary
What's New | Feature Articles | Product Reviews | Member's Area | Free Forum Registration
Duramax 6600 Diesel Page | Advertiser's Section | Classified Ads | The Diesel Page - Publications


Go Back   TheDieselPage.com Forums > The Diesel Page Forums > Towing - 5th-Wheels & Travel-Trailers
Register FAQ Members List Photo Album Mark Forums Read

Towing - 5th-Wheels & Travel-Trailers 6.2/6.5 and Duramax towing performance? Towing accessories? Truck/trailer setup? Compare RV trailers? Trailer maintenance? Great destinations & vacations? Anything towing or trailer related.

Reply
 
Thread Tools Display Modes
  #1  
Old 04-06-2019, 03:17 PM
chiefneon chiefneon is offline
Newbie
 
Join Date: Feb 2004
Posts: 1
Default Problem installing TPMS on 3500 DRW.

Howdy!

I recently purchased a new TV a 3500 Chevrolet HD/LTZ/DRW 2L Custom Hauler. Yesterday I was preparing for our trip and checking all the tires for air pressure and going to install my PresurePro TPMS on the new truck. To my surprise the two front tire had medal value stems, but the rear duels had rubber value stems. I took the truck into Premier Tires in Livingston, TX to have the rear value stems replaced with metal value stems and was told that they could replace the inter duel stems but not the outer tires value stems. They stated they could not replace them because the stem area was to small to get a socket wrench into the area the tighten the steam. I don’t want to run the TPMS in a rubber steam. I don’t think I can even if I tried because the stem is so short I don’t think it will screw on to the rubber stems. The tire store recommended that a dealership may have a metal tire stem for the rims. Has anyone had this type of problem, or have any suggestions I would appreciate the help.

 ” Happy Trails “

Chiefneon
Reply With Quote
  #2  
Old 04-06-2019, 07:36 PM
arveetek's Avatar
arveetek arveetek is offline
Moderator-Towing Forum
 
Join Date: Oct 2001
Location: Granby, Missouri, USA
Posts: 2,732
Default

I'm not aware of any requirement to have metal valve stems for the TPMS. At the RV dealership where I work, every system we have installed, included Pressure Pro and TireMinder, have been on rubber stems. No issues that I am aware of. Or is this just a personal preference you have?

Casey
__________________
1995 K1500 Tahoe 2 door, 6.5LTD, NP241, 4L80E, 3.42's, 285/75R16 BFG K02's, Kennedy OPS harness, gauges, and TD-Max chip, Dtech FSD on FSD Cooler, vacuum pump deleted, Turbo Master, 3.5" Kennedy exhaust, F code intake, '97 air box, dual t/stats, HO water pump, Champion radiator, Racor fuel filter, 345K miles and running strong!
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -7. The time now is 02:46 AM.


Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Copyright 1996-2019 by TheDieselPage.com - All Rights Reserved