TheDieselPage.com Forums
 
The Diesel Page Forums

2019 - TDP's 23rd Anniversary
What's New | Feature Articles | Product Reviews | Member's Area | Free Forum Registration
Duramax 6600 Diesel Page | Advertiser's Section | Classified Ads | The Diesel Page - Publications


Go Back   TheDieselPage.com Forums > The Diesel Page Forums > 6.2L Diesel
Register FAQ Members List Photo Album Mark Forums Read

6.2L Diesel 1982-93 6.2L Diesel - Welcome to the Internet's first discussion forum for the 6.2L engine.

Reply
 
Thread Tools Display Modes
  #21  
Old 04-14-2019, 09:50 AM
Yukon6.2 Yukon6.2 is offline
Enthusiast
 
Join Date: Dec 2003
Location: Yukon Canada
Posts: 1,040
Default

Hi Delta
As a GM guy i havn't seen a adapter like your new one.
I would use some pipe cut to lenght and long bolts for a temp solution
You could maybe use a piece of box tubing as well if it comes in the right size.
Are your plans to replace it?
And what was the reason for removing the tranny in the first place?
Thomas
__________________
90 Chev 3500 c/c 4x4,6.2na,400 auto,4:10 gears.DSG Timing gears,main girdle, isspro tach, pyro,boost,oil and trany temp.Dual Tstats, High volume peninsular pump,on shelf, Custom turbo and intercooler 85%complete. Change of plans for the dually, it's going to get a Cummins. Both trucks are Blue 90 4x4 crews
Reply With Quote
  #22  
Old 04-14-2019, 10:02 AM
sctrailrider's Avatar
sctrailrider sctrailrider is offline
Diesel junkie
 
Join Date: Feb 2012
Location: Pauline, SC
Posts: 513
Default

It looks like the case is clocked down a lot from the pics?
__________________
1993 Chevy K3500

owner - Twisted Steel Performance

porting, ceramic & powder coating



like us on Facebook
Reply With Quote
  #23  
Old 04-15-2019, 01:11 PM
DeltaWolf DeltaWolf is offline
Enthusiast
 
Join Date: Oct 2017
Location: Kansas City, MO
Posts: 12
Default

I haven't found out what exactly it goes to yet other than it looks like the 86-89 type. I was just thinking about using square pipe and and some nuts, but I do not have a welder. So I will use washers and a long blot if it lines up. I could see if I can find a 3 in rectangle or square tube and a 1/4" flat stock that would do it.


If it works I really do not have a plan to replace if as I found new aluminum ones that are like 400 bucks.


I remove the transmission as I bought the truck used, and had leaks everywhere, and I didn't get much out when I drained it. So I wanted to check out the transfer case and transmission. so out they came.



That is how it I got it and it seems to be the only way to get the drive shaft to the front without hitting the transmission mount.


If it isn;t right then I can not find any information or photos of the correct way as everyone pretty much has aftermarket parts and different transmissions and transfer cases.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -7. The time now is 07:21 PM.


Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Copyright 1996-2019 by TheDieselPage.com - All Rights Reserved