Originally Posted by
moss6
Yes the person I talked to was a Banks representative and when we spoke he consulted others at Banks for support of the discussion.
As for where the air temp sensor is I don't think that the information is in the Edge literature. One thing is for sure it is not in the intake tube and taken by the MAF because the temp is always at least 25 degrees (a bit less now) higher than the ambient and I have seen it 100 degrees higher than ambient when pulling hard with the current setup. I do not have data on the highs before the cold air and exhaust install.
same as the rest of us. Believe it or not, the MAF is the site of that reading
Michael 04.5 SRW LLY
custom stock intake, upsized boost tubes, Pre-turbo WMI, EFILive custom tune, Aerotech Scan Gauges.
Go Smokeless!